info-homer@hanglorygroup.com+86-755-23028597

Chinese
FAQ
HOME > SUPPORT > FAQ > text
Overprint dark banding
Author:HomerFrom:HomerDate:2017-01-10 11:05:34View:Loading...
Causes:

A. Some print head is angled, so heads are not properly aligned.

B. Feeder is too tight, causing poor feeding and high resistance to Y-axis stepping motor.

C. Stepping is not configured accurately by thickness of paper or fabrics.

Solution:

a. Adjust paper (fabrics) manually to reduce resistance.

b. Reset stepping parameter.

c. Flush clean print head if nozzle blockage occurs.